Announcements and Opportunities
Please check back regularly for announcements and opportunities from our members.
Project Name
ZAHN ROAD LIFEGUARD AND RESTROOM FACILITY - NEW CONSTRUCTION - CORPUS CHRISTI TX
Company Name
STODDARD GENERAL CONSTRCTORS
Project Location
137 ZAHN ROAD , CORPUS CHRISTI, TX 78418
Deadline for Submission:
July 29, 2026
Deadline Time:
10AM CDT
ITB STODDARD GENERAL CONTRACTORS
This Project will construct three (3) freestanding buildings consisting of a 3,809 SF Lifeguard Building and two (2) 447 SF Public Restroom Buildings.
Project Name
DOMINION PARK UPGRADES - SAN ANTONIO TX
Company Name
STODDARD GENERAL CONTRACTORS
Project Location
12 DOMINION PARK DRIVE, SAN ANTONIO, TX 78257
Deadline for Submission:
July 30, 2026
Deadline Time:
2PM CDT
ITB STODDARD GENERAL CONTRACTORS
Work to include storm water pollution prevention, tree preservation, protection of existing features to remain, demolition, grading and drainage, lighting, concrete pathways, bridges, trail furnishings, planting, irrigation, clean up, and project close.
Project Name
PARK IMPROVEMENTS AT GILLHAM PARK - BROWNFIELD TX
Company Name
SANDIA CONSTRUCTION
Project Location
201 West Broadway Street, Brownfield, TX 79316
Deadline for Submission:
July 21, 2026
Deadline Time:
5PM CDT
for project plans and specs CLICK HERE
The improvements to Gillham Park which include pond grading, park circulation, playground and shade structure installation, and landscape additions.
Project Name
MIDLAND ISD MS SAN JACINTO & ABELL ADDITIONS AND RENOV GROUP C PACKAGE 9 - MIDLAND TX
Company Name
SANDIA CONSTRUCTION
Project Location
1400 North N Street, Midland, TX 79701
Deadline for Submission:
July 30, 2026
Deadline Time:
5PM CDT
for project plans and specs CLICK HERE
SAN JACINTO JUNIOR HIGH SCHOOL
Stage I: June 2026- July 2026 (By Owner) a. Install temporary portable buildings and complete temporary utility connections including water, sewer, electric, and communications. b. Owner shall install flatwork and temporary TAS/ADA compliance paths of travel to and from portable buildings. c. Above and below-ceiling asbestos abatement performed by separate contractor.
Stage 2: August 2026- May 2027 a. Complete new library building addition b. Complete library courtyard renovations c. Complete administrative office renovations. d. Complete auditorium renovations e. Complete fire pump building addition. f. Perform new utility connections and installation. Complete north parking lot improvements.
Stage 3: May 2027- July 2027 a. Above and below-ceiling asbestos abatement of Rooms C112, C113, C114, D102, D103, D104, D105, and D109 (By Owner) b. Complete laundry room renovation. c. Complete Boy’s Athletic’s shower room renovation. d. Complete Kitchen snack bar renovation. e. Complete classroom reconfiguration and renovation affecting rooms B171, B144, B146, and B149. f. Complete paving improvements on the north side of the campus
g. Complete the majority of campus above-ceiling work, including fire sprinkler installation, lighting, mechanical, and finish ceilings.
Stage 4: August 2027- December 2027 a. Complete renovation of rooms C112, C113, C114, D102, D103, D104, D105, and D109. b. Complete renovation of Cafeteria Annex and support spaces. c. Complete renovation of new Life Skills suite. d. Complete renovation of Nurse suite. e. Complete all installation of new interior finishes. f. Complete remaining above-ceiling working including fire sprinkler installation. g. Complete finish ceiling installation. h. Removal of temporary portable buildings (By Owner) i. Complete paving improvements at east parking lot.
ABELL JUNIOR HIGH SCHOOL
Stage 1: Summer 2026 a. Relocate existing portable buildings as shown on the Construction Phasing Site Plan prior to the beginning of construction. b. Owner shall complete temporary utility connections including water, sewer, electric, and communications. c. Owner shall install flatwork and temporary TAS/ADA compliance paths of travel to and from portable buildings.
Stage 2: Fall 2026- Spring 2027 a. Complete new classroom addition. b. Complete administrative office renovation. c. Complete new utility installation and taps. d. Complete new classroom addition tie-in to existing boiler. e. Complete classroom addition grading, flatwork, and landscaping. f. Complete new detention basin.
Stage 3: Summer 2027 a. Complete all renovation work in the library, student commons space, kitchen and support spaces. b. Complete new secure vestibule and visitor entry improvements. c. Complete renovation of existing parking lots. (ADD ALT #1A)
Stage 4: Fall 2027- Spring 2028 a. Complete all renovations of approximately half of Area A including classrooms, science labs, teacher work rooms, and support spaces.
Stage 5: Fall 2027- Spring 2028 a. Complete all renovations of approximately half of Area A including classrooms, science labs, and support spaces.
Stage 6: Fall 2027- Spring 2028 a. Complete all renovations in areas as noted on Construction Phasing Drawings. These areas including parts of Area B and C. Spaces renovated include classrooms, corridors, and support spaces.
Stage 7: Fall 2027- Spring 2028 a. Complete all renovations in areas as noted on Construction Phasing Drawings. These areas including parts of Area B and C. Spaces renovated include classrooms, corridors, and support spaces.
Stage 8: Spring 2028- Summer 2028 a. Complete all renovations in the remaining parts of Area C, as well as Area D and Area E. Spaces renovated include visual and fine arts, athletic locker rooms, restrooms, gymnasium, and support spaces. b. Removal of temporary portable buildings, disconnection of utilities and demolition of associated flatwork performed by Owner.
Project Name
FM1100 RETAIL CENTER BUILDOUT - MANOR TX
Company Name
PARKWAY CONSTRUCTION
Project Location
13105 E US Hwy 290 in Manor, TX 78653
Deadline for Submission:
July 31, 2026
Deadline Time:
5PM CDT
The project consists of a retail shell with interior build out of a convenience store, and Public Works and TXDOT Road Improvement.
Trades included but not limited to: Survey, Demo, Concrete, Masonry (Brick, CMU), Structural Steel, Metal Fabrications, Interior Finish Carpentry, Insulation, Roofing, Joint Sealants, Doors, Storefront, Drywall, ACT, Tiling, Sealed Concrete, Painting, Toilet Accessories, Awnings/Canopies, Plumbing, Mechanical, Electrical, Earthwork, Striping, Landscaping, Utilities.
Project Name
HILTON ANATOLE PHASE 3 RENOVATIONS - DALLAS TX
Company Name
PARKWAY CONSTRUCTION
Project Location
2201 North Stemmons Freeway in Dallas, TX 75207
Deadline for Submission:
August 3, 2026
Deadline Time:
5PM CDT
The Scope of this phase of the project focuses on the complete renovation of the following areas:
. CounteroAer Gourmet Market (To be converted to “Junction”) . Trinity Ballroom and Prefunction (Including Art Corridor and Rotunda)
. Trinity Restrooms (3 sets)
. West Wing (Cortez, Coronado, De La salle, & Desoto)
. West Wing Restrooms (2 sets)
. Gossip Bar Interior Renovation
The scope is fully defined in the documents provided. In summary, it is comprised of, but not limited to, the
following:
. Junction Scope
o Demolition of existing bar and back of house kitchen area
o Reconfiguration of existing bar die wall and equipment
o Reconfiguration of existing back of house kitchen area
o New location of coAee bar
o New metal framing and gypsum board
o Reconfiguration of existing electrical, plumbing, and mechanical systems
o New coAee, kitchen and bar equipment
o Reconfiguration of fire sprinklers
o Reconfiguration of fire alarm devices
o New Finishes
. Trinity Meeting Space and Prefunction Scope
o New floor, wall, and ceiling finishes
o Retrofitting existing lighting
o Replace acoustical ceiling tiles
o Repair damaged floors, walls, and ceiling where required
o New folding wall partition in trinity ballroom
o Replace electrical devices and face plates o New ceiling felt baAle system with structural support in the trinity ballroom
o Remove existing pendant lighting and replace with new in the trinity ballroom
o Reconfiguration of existing mechanical units to install new dropped gypsum board ceiling or soAits in the trinity
ballroom & prefunction space
o Removal of existing pendant lighting and installation of new lighting in the trinity ballroom & prefunction space.
o Rework of existing fire sprinklers and fire alarm devices
. Trinity restrooms Scope (3 sets)
o Reconfiguration of plumbing fixtures and framing to meet current accessibility requirements.
o New floor, wall, and ceiling finishes
o New ceiling lighting
o New lit vanity mirrors
o Relocation of existing mechanical duct work
o New cast iron rough plumbing
o New copper water lines
o Removal of 2 existing sinks at the men’s prefunction restroom
o Addition of 1 urinal and 1 lavatory in the men’s prefunction restroom
o Removal of 4 sinks in the women’s prefunction restroom
o Rework of existing fire sprinklers and fire alarm devices
o Removal of 1 existing lavatory at the men’s and women’s exhibit hall restroom A and B
. West Wing Restrooms Scope
o Reconfiguration of plumbing fixtures and framing to meet current accessibility requirements.
o New floor, wall, and ceiling finishes
o New ceiling framing
o New ceiling lighting
o New lit vanity mirrors
o New wall sconces
o Relocation of existing mechanical duct work
o New cast iron rough plumbing
o New copper water lines
o Addition of 3 water closets in the women’s west wing B restrooms.
. West Wing Corridor & Meeting Space Scope
o New floor, wall, and ceiling finishes
o Relamping existing lighting
o Replaced damaged ceiling tiles
o Repair damaged ceiling tiles
o Repair damaged floors, walls, and ceiling where required
o Remove and Replace folding partition wall panel finish
o Demolish existing wall sconces in the Coronado ballroom
. Gossip Bar Interior Renovation
o Demolition of existing bar and back of house kitchen area.
o Reconfiguration of existing bar die wall and equipment
o Reconfiguration of existing back of house kitchen area
o New metal framing and gypsum board
o Reconfiguration of existing electrical, plumbing, and mechanical systems.
o New kitchen and bar equipment
o New finishes
. Other
o Protection. Contractor will be responsible for an allowance for protection of completed and crossover areas during
construction. (Include as necessary)
? Please include wall separation between areas under construction and those accessed by guests as shown in the
links below:
. https://www.sunbeltrentals.com/equipment-rental/temporary-containment-walls/temporary-wall-systems/
. https://tempwallsystems.com/locations/north-dallas/
Project Name
OSO BEACH GOLF COURSE CLUB HOUSE - NEW CONSTRUCTION - CORPUS CHRISTI TX
Company Name
STODDARD GENERAL CONTRACTORS
Project Location
5601 S ALAMEDA ST, CORPUS CHRISTI, TX 78412
Deadline for Submission:
August 5, 2026
Deadline Time:
2PM CDT
ITB STODDARD GENERAL CONTRACTORS
The OSO Golf Center Clubhouse is a new mixed use facility consisting of two
buildings connected by a substantial covered entry. An existing structure an
selective stie items will be demolished. The Pro Shop portion consists of a Golf
Shop, storage, offce and ancillary spaces. The Dining portion consists of a dining
room, restrooms, bar, kitchen, F&B office, secure storage, mechanical room, small locker area, cold and freezer storage. An alternate for an event space is attached to the dining portion. Refer to contract documents, plans and specifications for additional information.
Project Name
NMGSD FMD MORA COUNTY COMPLEX TENANT IMPROVEMENTS - MORA NM
Company Name
BRADBURY STAMM
Project Location
1 Courthouse Drive - Mora, NM 87732
Deadline for Submission:
August 4, 2026
Deadline Time:
1PM MDT
for project plans and specs CLICK HERE
Work includes, but is not limited to:
1. Construction of new interior walls, partitions, and ceilings per the Construction Drawings, including framing, drywall, insulation, and all associated fire-rated assemblies.
2. Installation of new interior finishes and casework, including flooring, wall finishes, ceiling
finishes, millwork, and countertops as specified in the Project Manual.
3. Installation of new plumbing systems and fixtures, including domestic water and hot water,
waste, and vent piping, and all associated connections to existing building systems.
4. Installation of new HVAC system and fire protection system in the south wing, including all
ductwork, piping, controls, equipment, and connections to the new mechanical equipment.
Refer to Mechanical Drawings for equipment schedules and specifications.
5. Installation of new electrical systems, including power distribution, lighting, panels,
circuitry, and all connections to existing building electrical service.
6. Installation of new technology and security infrastructure, including but not limited to:
structured cabling (voice and data), access control systems (card readers, electric strikes,
controllers). Refer to Technology Drawings and Specifications for complete requirements.
7. Installation of new exterior windows, including selective demolition of exterior walls,
framing modifications as required, new window units, flashing, sealant, and interior and exterior trim.
8. Exterior stucco patchwork at new window locations and at the south entrance soAit. Patchwork scope is limited to areas within twelve (12) inches of new window frames and
the soffit area identified on Drawing A-201. All patchwork shall match the existing stucco profile, texture, and base coat color.
9. Installation of a new elevator in the existing shaft, including all cab finishes, door assemblies, guide rails, controls, electrical connections, pit equipment, and machine room equipment.
10. Demolition and reconfiguration of Phase 2 work areas, including selective demolition of existing interior partitions, demolition and relocation of multi-stall restrooms on the first
floor, ceilings, flooring, MEP systems, and preparation of the space for new construction.
11. Phase 2 work will include the construction separate entry and exit vestibules and a security oAice, courtroom and support spaces for the Fourth Judicial District Court. All walls,
ceilings, doors, and glazing, as indicated in the construction documents, will be designed to
level 2 ballistic resistance. The entry vestibule will feature a queuing area, a security screening room equipped with a metal detector and x-ray machine, and access controlled doors. The exit vestibule will serve as a sally port with interlocking doors that can only be opened simultaneously, with a fail-safe override in case of a fire alarm. The security office will have direct visual observation of the entry and exit vestibules, supplemented by CCTV. The metal detector, x-ray machine, and all surveillance equipment will be provided and installed by the Courts. Contractor will coordinate with AOC on some of this work.
12. Reconfiguration of existing HVAC system and fire protection system in Phase 2 work areas
(north Judicial section), including demolition of existing ductwork and piping, rerouting and
connection to new equipment, and balancing of all modified systems.
13. Cladding of exterior columns at the main entry to the south wing, including CMU and metal
panel materials to match the existing north wing entrance. Refer to Drawings A-301 and A-302
for dimensions, profiles, and material specifications.
14. Painting of columns and exposed structural components at the secondary building entrances at the south and west entrances, including surface preparation, primer, and two (2) finish coats of exterior-grade acrylic latex paint. Color to be selected by Architect.
15. ADDITIVE ALTERNATE No. 1: Complete exterior stucco color coat over the entire building exterior. This alternate is in addition to the base bid stucco patchwork in Item 11. Refer to the Bid Form for pricing of this alternate. The Owner reserves the right to accept or reject this alternate at any time prior to execution of the Contract.
Project Name
NMGSD FMD DPS METROPOLITAN COMPLEX - CONSTRUCTION OF 2 NEW BUILDINGS - ALBUQUERQUE NM
Company Name
BRADBURY STAMM
Project Location
1250 Menaul Blvd. NE - Albuquerque, NM 87102
Architect
DESIGN GROUP
Deadline for Submission:
July 20, 2026
Deadline Time:
3PM MDT
for project plans and specs CLICK HERE
1. The Work includes:
a. The demolition of an existing building.
b. The construction of the Main building.
c. The construction of an Auto Shop Building.
2. The construction of the Main Building includes approximately 8,800 square feet
with associated utilities, as shown.
3. The construction of the Auto Shop Building includes approximately 4,800 square
feet with associated utilities, as shown.
4. All associated grading, paving, sitework, site utilities, and landscaping.
Subcontractor Qualifications are required for MEP, Roofing, Concrete, Steel Erection, Storefront, Masonry, EIFS, and those subcontractors whose contract will be over $750,000. Please send to quals@bradburystamm.com by noon 7 17-2026.
Project Name
CARVANA - ADESA AUTO AUCTION - NEW CONSTRUCTION - HUTCHINS TX
Company Name
PARKWAY CONSTRUCTION
Project Location
3501 Lancaster Hutchins Rd, Hutchins, TX 75141
Deadline for Submission:
July 24, 2026
Deadline Time:
5PM CDT
Ground-up construction of a pre-engineered metal building for Adesa (Carvana’s
wholesale auto auction) in Hutchins, Texas.
Trades needed but not limited to: Demolition, Cast in Place Concrete, Saw Cutting, CMU, Structural Steel, PEMB Erection (PEMB being supplied by owner), FRP, Gyp Assemblies, Painting, Sealed/Polished Concrete, RR Accessories, Plumbing, HVAC, Electrical, Fire Suppression, Fire Alarm, Earthwork, Striping, Asphalt Paving, Concrete Paving, Pavement Markings, and Utilities.